TECNO RA8/POP 2S FULL FIRMWARE TO FIX ALL

 

DEVICE SPECIFICATIONS/INFORMATION

• Device manufacture: Tecno Mobile Limited
• Device name: Tecno Pop 2s
• Model: Tecno RA8
• Cpu: Mtk6761
• Operating system: Android 8.1 oreo
• Ram: 1gb
• Camera: 13mp back 8mp front
• Battery: 3050 mAh non removable
• Network supported:2g/3g/4g
• Storage: Internal 16gb
• Hanging on logo while boot completely solved by this firmware
• Insufficient space cleared
• Unknown base band or invalid imei solved
• Fixing fast boot mode while boot up
• Solving camera issues
• Removing/clear password and pattern
• Clear google account forgotten by user
• Clear lcd problem  
• Clearing privacy
• Removes viruses
• Repair device where a wrong firmware written on it.
• fixing boot loop problem

Software repair requirements:

• Full downloaded firmware
• Flash tool SWD flash tool, Cm2 dongle tool
• Universal serial bus cable (usb)
• Drivers
• Laptop/Computer with full program installed

How to repair phone by SWD flash tool

• Download full signed firmware and extract by using 7zip or win rar software
• Install drivers
• Run tecno flash tool (SWD flash tool) software
• On the top left corner click on setting
• Load a scattered file
• Select firmware upgrade, format all and download, backup and recovery download, download only and reserve data but choose one of them then click confirm. Pay attention when you select format all and download your device base band is going to be erased so you need to repair by maui meta software after flashing process completed.
• On the upper left corner click on a green button to get started
• Don't connect a device wait until the firmware is generated
• When you see on a upper left corner where you clicked to start is red in color ensure that your device is charged at least 50% then connect while it is turned off , once not detected unplug and plug battery then connect
• Wait until until green color /writing process completed successfully
• It over remove cable and power on your device